The AC650 Servo Control Card

The AC650 servo control card is used for linear positioning and hydraulic servo valve control.  It can be used as a stand alone controller or can be used in multiple axis systems.

AC650 Manual Download PDF

Firmware Features

• Isolated 8 inputs and 8 outputs (5-32VDC)
• Non-volatile memory storage so no battery backup is required.  
• High-speed  RS485/RS422 SDLC serial port. Baud rates of 1.2 m standard
• Low-speed RS-422 serial port accessible through a 6 pin phone jack. Baud rates of 2400 to 19.2k.
• Digital interface to MTS® Temposonics® linear transducers.
• Provides +/-  0-100 mA current output for Servo valves.
• Has +/- 10vdc output capability.
• Dip switch auto-null selection.
• Addressable Dip switch settings for up to 8 axes.
• Red status LED’s mounted on the face of the board.
• Uses Euro-style connector for easy installation in single or multiple card racks.
• Can be interfaced to RS-232 serial communication port through inexpensive converter.

Software Features

• Custom programs embedded on UV EPROM.
• Programs written to interface card control through a phone jack to dummy computer terminals.
• Programs written to interface card to PC’s through high-speed serial port.
• Personal Computer (PC) High-speed communications board available.
• Data presented in thousandths of inches or centimeters.
• Programs written for special applications.

Power Specifications

• +5vdc @ .5 amps
• +15vdc @ .1 amps*
• -15vdc @ .1 amps

*When using TransTerm 5 Computer terminal, +15vdc .5 amps is required.

Operating Temperatures

• -40 TO 150 deg.F ( -40 to 66 deg. C.)

AC651 Servo Controller Card Features and Electrial Specifications

The AC651 servo control card is used for linear positioning and hydraulic servo valve control.  It is used with PLC’s as a external servo controller.  A PLC can control 1-8 axes per bank.

AC651 Manual Download PDF

Firmware Features

• Isolated 17 inputs  (5-32VDC)
• Non-volatile memory storage so no battery backup is required.
• High-speed  RS485/RS422 SDLC serial port. Baud rates of 1.2 m standard
• Low-speed RS-422 serial port accessible through a 6 pin phone jack. Baud rates of 2400 to 19.2k.
• Digital interface to MTS(R) Temposonics® linear transducers.
• Provides +/-  0-100 mA current output for Servo valves.
• Has +/- 10vdc output capability.
• Dip switch auto-null selection.
• Addressable Dip switch settings for up to 8 axes per bank.
• Red status LED’s mounted on the face of the board.
• Uses Euro-style connector for easy installation in single or multiple card racks.
• Can be interfaced to RS-232 serial communication port through inexpensive converter.

Software Features

• Custom programs embedded on UV EPROM.
• Programs written to interface card control through a phone jack to dummy computer terminals.
• Programs written to interface card to PC’s through high-speed serial port.
• Personal Computer (PC) High-speed communications board (PC1) available.
• Data presented in thousandths of inches or centimeters.
• Programs written for special applications.

Power Specifications

• +5vdc @ .5 amps
• +15vdc @ .1 amps*
• -15vdc @ .1 amps

*When using TransTerm 5 Computer terminal, +15vdc .5 amps is required.

Operating Temperature

• -40 TO 150 deg. F ( -40 to 66 deg. C.)

AC700 Temposonic® Interface Card

The AC700 Temposonic® card provides multiple digital interfaces for MTS® I, MTS® II, LP and LH Temposonics probes.  Through the use of user installable jumpers, the interface card meets all interfacing needs for MTS® linear transducers.

AC700 Manual Download PDF

Firmware Features

• +5vdc regulator installed on board.
• Capable of interrogating transducers > 100ft.
• Heavy duty Entrelec connectors used  for high vibration environments.
• Board thickness is .120” to provide for solid non flexing in high g-force environments.
• All firmware soldered directly to board.
• User installable jumpers for configuring the board. 
• Board jumpers include 1-8 Recirculations, external/internal interrogation,  MTS® I and MTS® II, jumper configuation for MTS® II probes using DPM’s.
• Red Power status and Yellow Run status LED’s mounted on the board and located on a printed operating/troubleshooting truth table overlay.
• Servo valve connections on board terminals.
• Labeled terminal connections.
• Installation and operation manual provided with each unit.
• Timing selection for probes 0 to 48” and 48” to 170”.

Power Requirements

Operating Temperature

• -40 TO 150 deg.F ( -40 to 66 deg. C.)