Line Shaft Carriage System

For Hydraulic Line Shaft Carriage
Provider for Cleereman
Carriage Systems

Simple Set System

8 programmable board sizes per species
8 programmable cant sizes per species
8 programmable pre-stack sizes per species
4 species tables
Manual and face 2 and 4 back stand compute functions
When changing from mode to mode entries are remembered
Run Screen 1 displays knee position, target, board and/or cant selected, log breakdown when computed back stand is used, and system status
Alternate Run Screen shows minimal operation information
Multiple screens for information of the system and parameter entry are: menu, system parameters, species sizes, Knee/s calibration to sawline, motion dynamics, axis status, timers, and cant prestack building
Adjustable software limits for dogs extended, hammer dog forward limit, reverse limit, set velocity and jog velocity are entered through the system parameter screen

AC Control Features

All dogging and on carriage control provided by our system; no extra boxes required
Separate Knee Taper block control
Carriage log turners or brownsville turners
Brake control if used
Separate dog up/down control for each knee
User defined specialized AC control if required

Only one electrical enclosure to install. Doubles as the operator panel.
Touch Screen mounted in the panel.
Touch Screen panel is an 8” diagonal color.
Operator push button handles, power cord, knee control, and AC carriage control connected directly to panel.
Operator panel is a 16x16 Hoffman slope front panel that has a flat bottom so the sawyer has leg room.
Since one box is used, installation is easier and quicker.
Included in the package is a proportional valve and Servo Sensor for feedback and motion control.
A single cable is provided for installing on the pantograph from the console to proportional valve and Servo Sensor.